Kia wheel size. Kia Rio wheel bolt pattern What is the Kia Rio wheel bolt pattern?

Kia cars, Rio and Spectra models are very popular in the Russian Federation. These passenger cars have earned respect due to their high technical specifications, comfort, internal equipment, ease of use, safety and reliability. Naturally, appearance and price factors also played an important role in this matter.

One of the most important characteristics is the vehicle's handling. This indicator is influenced by the wheels installed on the car. The controllability, reliability and safety of driving the Kia Rio and Spectra depend on their wise choice.

Kia Rio on factory wheels

According to the manufacturer, effective handling and aesthetic appearance depend on the size of the wheel used. In addition, high-quality models affect the degree to which:

• controllability;
• braking characteristics;
• driving comfort;
• operation of the main suspension components and tires;
• aerodynamic indicators;
• fuel consumption.

An illiterate choice will most likely lead to negative consequences. For example, handling or aerodynamic performance may deteriorate. As a result, the owner of a Kia Rio will have to shell out additional funds to change wheels and tires.

Optimal wheel size for Kia Rio

The choice of optimal indicators for a wheel directly depends on the sizes of tires and wheels. Accordingly, when choosing Special attention attention should be paid to this factor.

For those who are planning to do tuning, you should take advantage of the competent advice of experienced craftsmen. They will advise you on the most suitable wheel size and diameter.

Vehicle owners who prefer to use “powerful horses” for their intended purpose can take advice from manufacturers Kia Rio by choice of standard sizes. At the same time, manufacturers guarantee high vehicle controllability, according to maximum characteristics at any road conditions when using factory wheels.

Installing wheels with non-standard parameters can cause poor handling and poor comfort. Speaking about the characteristics indicating the designation rims, then it is worth highlighting three important indicators:

1. diameter;
2. width;
3. loose bolt

Therefore, the correct choice of disk size directly depends on the wheel used. First of all, you should analyze and decipher the disk designation. For example, the 2011 Rio has a factory wheel size of 5.5J/15. The first indicator is the width of the rim, and the second number shows the exact diameter of the wheel being used. This indicator is measured in inches.

As for tires, they are usually designated using the following method: 185/65/R15. This or an identical type of marking is indicated on the surface of the tire. The first number determines the width in centimeters, the next shows the ratio of the height of the material to the size of the tire, and the third indicates the diameter of the disc used.

Wheels for Rio 3 have identical performance to their second generation counterparts. However, their exact parameters are affected by basic equipment and vehicle updates. This refers to the wheels and tires used on newer modifications of vehicles when sold. Even though the factory parameters of the wheels are set, in the end they can be replaced with more comfortable and presentable analogues.

You can also install larger wheels on the Kia Rio. As an example, let's take a size like 205/55/R16. However, without additional changes and modifications in terms of the arched structure, such wheels cannot be installed. However, it is not always necessary to apply drastic decisions. Usually, to install large models, you can mount volumetric fender liners. Thus, when driving and sharply turning the steering wheel, the wheels will not catch them. In this situation, the wheelbase dimensions are determined according to the characteristics and capabilities of the arches.

Changing wheel sizes on Rio

Do not forget that for the Rio model, it is best to use the wheel sizes 175/70/R14, 185/65/R14, 195/55R15 recommended by the manufacturer. IN otherwise this can lead to a decrease in suspension performance, a decrease in dynamic acceleration performance and violations of the digital settings on the speedometer. Larger wheels may be an exception to the rule if certain design changes are made.

Wheel bolt pattern

This process plays an important role in determining required sizes disks on all types of machines. The bolt pattern shows the number of studs for fastening the wheel, the diametrical size of the holes and the main location. Basically, the studs for attaching the nuts are located on the hub. Passenger cars have 4 to 6 studs, depending on the model. It is extremely important that the disc holes match the diameter of the studs as well as the number of studs.

It is worth taking into account such important parameters as the thread of fasteners and overhang. Disc offset has a direct impact on wheel parameters for a particular vehicle model. When it comes to mounting threads, it is worth choosing the correct cone-shaped centering nuts for the main installation of wheels on the Kia Rio.

When loosening wheels, it is necessary to take into account the basic parameters declared by the manufacturer. For the Rio 54 by 100 model:

• hole – 54.1;
• departure – ET46;
• mounting thread – M12 by 1.5.

Based on the given characteristics, the wheels are secured with 4 bolts with disc circumferences of 100 mm. Other bolt pattern parameters are not recommended for safe and reliable operation of the vehicle. It is worth highlighting the fact that in terms of fastening, the wheels on Rio 2011-2016 are in no way different from the second edition of the car from 2005-2010. Accordingly, the bolt pattern will be the same.

Competent choice of wheels on the Spectra

The choice of wheel sizes on the Spectra directly depends on the use of steel or titanium wheels with the following standard sizes:

• hub diameter DIA;
• rim width J;
• wheel diameter R;
• bolting and drilling DCO and PCD.

1. Spectra 1.8 – 185/65R15;
2. Spectra 1.6 – 185/65/R14, 196/65/R14;
3. Spectra 2.0 – 195/65/R15.

If the prescribed parameters are not followed, this factor can seriously affect the handling, braking distance and aerodynamics of the vehicle. In addition, the manufacturer cancels the warranty on the vehicle if the factory specifications are not followed.

The wide range of wheels on the domestic market offers various variations on Kia Spectra. Popular manufacturers include:

• Continental;
• Nokian.

For Spectra this is the most optimal options tires In addition, their dimensions make it easy to control and maneuver the machine. If a car enthusiast finds it difficult to choose wheels, then you can turn to experienced tire specialists for help.

Wheel brands

For such popular models as Rio and Spectra, the domestic market offers a large assortment of high-quality wheels. Prices for new tires and wheels vary widely. Based on the cost, you can determine whether a product is fake or original with the specified characteristics.

When giving preference to one wheel or another, special attention should be paid to their purpose and the quality of the products sold in auto stores and markets. Well-known brands such as Bridgestone and Pirelli use unique nanotechnology to create original tires, allowing them to achieve excellent results in terms of vehicle handling and speed performance.

Basically, the cost of wheels from these manufacturers is significantly higher than similar models. However, budget-price options do not have the same level of relationship between quality and cost.

Now domestic brands have begun to actively compete with foreign manufacturers quality rubber for the wheelbase. Such companies have managed to gain great popularity among many Kia owners. There are also other manufacturers on the car market offering good quality tires from China. Moreover, many of them have been trying to compete with more expensive analogues for several years.

Among the wheel manufacturers with worldwide recognition and high popularity, it is worth listing the following brands:

• Bridgestone;
• Pirelli
• Hankook;
• Dunlop;
• Michelin.

Domestic and Chinese manufacturers high quality wheels:

• Codriant;
• Viatti;
• Goodride.

For modified Kia Rio and Spectra, Hankook and Kumho Solus tires are usually used. Both manufacturers produce high quality tires that meet safety standards.

Crash tests have shown that such tires can outperform even famous competitors in terms of speed. As an optimal replacement you can use Nokian tires 5, delivering unrivaled handling and braking performance in all conditions.

As an optimal winter tires will fit Russian tires Cordiant Polar 2. They show excellent results in terms of high control, braking on steep descents and straight roads, as well as long-term operation.

Bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. What kind of bolt pattern on Kia Rio 2018

Bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. Kia Rio 2018 bolt pattern

Wheel and rim sizes for Kia Rio All wheel parameters: PCD, offset and rim size, drilling

Kia Rio YB 2018 - 2019

Sedan

Hatchback, 5d

Kia Rio YB 2017 - 2019

Sedan

Hatchback, 5d

Kia Rio UB 2011 - 2017

Sedan

Hatchback, 5d

Hatchback, 3d

Kia Rio JB 2005 - 2011

Sedan

Hatchback, 5d

Kia Rio DC Facelift 2002 - 2005

Sedan

Station wagon, 5d

Kia Rio DC 2000 - 2002

Sedan

Station wagon, 5d

1. Razboltovka.ru
2. Rio III(UB)
3. 1.6 CVVT (123 hp, gasoline)

• LZ (number of holes)
• ET (disc offset)
• DIA (hole diameter)

	2012	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2013	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2014	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2015	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2016	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory

Wheel bolt pattern Kia Rio I (DC) 2005 1.5 (95 hp, gasoline)

1. Razboltovka.ru
2. Rio I (DC)
3. 1.5 (95 hp, gasoline)
4. 2005

Find options Kia drive Rio I (DC) 2005, 1.5 (95 hp, gasoline).

Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2005.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Save just in case so as not to lose! Make model modification Auto Year of manufacture Wheel width Wheel diameter Bolt pattern LZ*PCD Offset ET DiameterDIA Installation type

	2005	5.0	13	4x100.0	40	54.1	Factory
Kia Rio I (DC) 1.5 (95 hp, petrol)		5.5	13	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.5 (95 hp, petrol)		5.5	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.5 (95 hp, petrol)		6.0	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.5 (95 hp, petrol)		6.0	15	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.5 (95 hp, petrol)		6.5	15	4x100.0	34	54.1	Acceptable

Wheel bolt pattern Kia Rio I (DC) 1.3 (82 hp, gasoline) (2002-2005)

	2002	5.0	13	4x100.0	40	54.1	Factory
Kia Rio I (DC) 1.3 (82 hp, petrol)		5.5	13	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		5.5	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		6.0	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		6.5	15	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		6.0	15	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)	2003	5.0	13	4x100.0	40	54.1	Factory
Kia Rio I (DC) 1.3 (82 hp, petrol)		5.5	13	4x100.0	34	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		5.5	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		6.0	14	4x100.0	32	54.1	Acceptable
Kia Rio I (DC) 1.3 (82 hp, petrol)		6.5	15	4x100.0	34	5

website

Bolt pattern is an important dimension of Kia Rio rims

A little history

Kia is a Korean brand specializing in the automotive industry. The company produces a wide range of vehicles, from compact hatchbacks, solid sedans to minibuses and full-fledged buses designed for urban transportation. One of the popular car models produced under this brand is Kia Rio.

This machine first appeared on the European market in 2000. To date, 3 generations of this car have been produced. The first is available in station wagon and sedan bodies. After 3 years, KIA RIO comes off the assembly line in an updated form. The headlights have undergone changes. In addition, the car receives improved sound insulation and front brakes.

In 2005, the second generation of this car was released. In 2010, the brand began cooperation with a famous German designer. Almost everything in the car changes: the radiator grille, bumpers, steering wheel, several new colors appear, the length of the car increases, etc. Starting in 2010, Kia Rio began to be assembled in Kaliningrad.

The third generation of the car was released in March 2011 on the platforms of 2 Hyundai models - Solaris and i20. In Russia at that time they are planning to release a special KIA model RIA. It will be presented to potential buyers in August 2011. The base car for this new product was the Chinese one. KIA car K2, which was fully adapted for use in Russian conditions. Models of this car released in 2013 and 2014 received new body.

Today Kia Rio is one of the most popular cars in Russia, with an affordable price and excellent quality. Therefore, many car enthusiasts choose this particular car for themselves. The car is the most practical and best-selling in its class. Due to affordable price The sales level of this car model is at its highest high level. Kia owners Rio often tunes their car, paying special attention to replacing standard disks, tires

What is a bolt pattern?

It would seem that there is nothing complicated in this process: it is enough to remove standard wheels and replace with new ones. But in reality it's not that simple. Loosening discs and replacing them is a very lengthy and labor-intensive process, especially for those who have never done this.

The discs are attached to the wheel hub using bolts or spokes (certain parameters play a huge role in this - the size and weight of the disc). So, for light alloy products, spokes are used, thanks to which the wheel is perfectly fixed. Bolt discs also differ in the number of holes. The marking says 05/112. This inscription indicates that there are 05 holes located on a circle whose size is 112 mm.

These parameters will be different for different car brands. If they are absent, you can carry out the bolt pattern yourself.

Important! The bolt pattern of a disk having an odd number of fasteners is calculated using a certain formula. You will need to measure the distance between the bolt holes. Next, you should multiply the resulting value by a coefficient, which for 03 fasteners is 1.55, and for 05 – 1.701.

How to perform disc bolt pattern?

So, where to start the wheel bolt pattern procedure for a Kia Rio? This can be done in several successive steps:

1. Determine all significant technical parameters of the wheels. Selecting disks is a responsible task. Here you need to pay attention not just to the external attractiveness of the wheels, but also to other characteristics, in particular the bolt pattern. But first you need to determine what sizes and markings of disks you need.

But in principle, no confusion should arise, since all disks have standard markings corresponding to their parameters. All discs have the same standards. All the necessary indicators for the Kia Rio of various modifications can be found on the Internet.

So, for example, a KIA RIO car produced in 2013 and 2014 has the following marking - 6J R15 PCD 4x100 ET48 DIA54.1. This combination provides the owner of a Kia Rio with a wheel rim width of 6 inches and a diameter of 15 inches.

The following combination of letters and numbers is PCD 4x100 - a European marking that indicates the number of holes and the diameter of circles. These parameters represent a bolt pattern, i.e. Rio has 4 bolts, which are 100 mm in diameter.

When installing a new disk, you should pay special attention to such a parameter as disk offset. This parameter is no less important than wheel bolt pattern. If the new disk has a negative value, then during various maneuvers (sharp turns) the wheels will protrude outward. If this value is too high, the disk will not be installed. Therefore, wheel offset is one of the most important indicators.

The disc offset for Kia Rio is indicated by the following marking – ET48. When the surface planes of the disk coincide with its center, the offset indicator is 0. By European standards, the Kia Rio has a positive offset exactly at a distance of 48 mm.

1. Determine bolt pattern. You can do this on your own using one of the proposed methods:

• When planning to buy new wheels, just take with you the old models that need to be replaced. Compare disk sizes.
• Measure the distance between the fasteners using a special measuring tool. This is a last resort option for those who do not have old disks.

How to determine the standard tire and wheel sizes?

Define standard sizes Wheels and tires on a Kia RIO, for example, the 3rd generation, do not require any special skills or abilities. When purchasing tires for this car, it is important to know such parameters as bolt pattern and offset. This car produced since 2011, it is equipped with disks of two radii - R15 and R16. It all depends on the configuration of the car. Some people use low-profile tires with a diameter of R17.

For cars produced in 2010, tires with a rim diameter of R14, R15, R16 are suitable.

Important! The tire sizes for a car of this model are: for R15 - 185/65, and for R16 - 195/55. If you decide to purchase non-standard tires, then the deviations in the wheel diameter should be minimal, and the bolt pattern should be suitable in any case.

If you need any help when determining the bolt pattern, it is better to immediately entrust this matter to specialists. They will help you determine the diameter, tire size, wheel offset and other parameters of interest for cars produced in 2002-2014.

How to choose disks and which ones are best to buy? The answer is in this video:

ilovekiario.ru

distance and number of wheel mounting bolts

Every driver strives to stand out from the gray mass by spending little money. Shallow tuning involves slight changes in the appearance of the wheels, plastic hood and glass deflectors, and the application of stickers. Owners who decide to make a change will need to select and buy new wheels that fit the Kia Rio.

Choice

The parts differ in size and location of bolts. When you come to the store, contact a consultant - he will select disks with suitable parameters.

Owners of a Kia Rio of any generation will need a bolt pattern of 4 to 100 - quite common, sold in almost every car store. The 4 to 98 bolt pattern is even more common; it fits VAZs of all generations up to new Lada Vesta and Lada X-ray.

Under no circumstances should you confuse the parts - the holes simply won’t fit.

After choosing the wheel bolt pattern, you will need to decide on the diameter. Please refer to your vehicle owner's manual for the appropriate dimensions. Extra inches of disks give strong resistance to the engine, it will overheat and fuel consumption will increase.

The optimal diameter for Kia Rio is 15–16. Some owners install 17, but with low-profile tires.

The next indicator is width. Kia Rio arches are designed for a width of 185–195. Deviations from these numbers will affect the technical characteristics specified in the vehicle passport.

If appearance car is not particularly important to you, then you can choose wider and larger wheels, but you will have to fill in more fuel and carry out more frequent technical inspection.

The last thing that the owner chooses is the shape and color of the pattern. In this case, there is nothing to advise - the choice is yours.

Coloring

Sometimes the color of the wheels does not suit the car or does not suit the owner. Typically, discs are painted in standard shades - black, white, and are rarely painted in others. Discs that have a 5-10 millimeter thick strip of bright color along the rim are gaining popularity.

The wheels you like can be easily painted yourself or at a service center.

There are two types of painting: powder and acrylic. The first is better, but you will need special equipment to heat the powder to the desired temperature. The advantage of this method is that the metal is painted while heated, and when it cools, the paint is firmly fixed to the material.

Acrylic paint gives the same effect, but you will need to perform a number of operations during preparation. What kind of paint will be on your wheels is up to you. Powder can cover only the entire surface with one shade, acrylic can cover several colors at once.

After you have chosen the wheels for your Kia Rio and painted them, it's time to start installation. At this point you need to be extremely careful not to scratch the parts - when the key falls off, it can cause serious damage. Many owners also paint the bolts, in which case the parts look even more beautiful, but during installation it is better not to damage the paint on the bolts themselves, otherwise the work has been done in vain.

Conclusion

Sometimes car owners want to stand out from the gray mass and improve the appearance of the car, for example, by replacing and painting the wheels. If you decide to modify your wheels, you should remember the sizes - they must correspond to those specified in the car’s owner’s book, otherwise you can’t count on driving performance declared by the manufacturer.

kiario.pro

What is the wheel bolt pattern on a Kia Rio - Kia Rio wheel bolt pattern

Wheel bolt pattern Kia Rio I (DC) 2004 1.5 (95 hp, gasoline)

1. Razboltovka.ru
2. Rio I (DC)
3. 1.5 (95 hp, gasoline)
4. 2004

Table of parameters and wheel bolt patterns for the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2004.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio II (JB) 2007 1.4 16V (97 hp, gasoline)

1. Razboltovka.ru
2. Rio II (JB)
3. 1.4 16V (97 hp, gasoline)
4. 2007

Table of parameters and wheel bolt patterns of the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2007.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio I (DC) 2000 1.5 16V (98 hp, gasoline)

1. Razboltovka.ru
2. Rio I (DC)
3. 1.5 16V (98 hp, gasoline)
4. 2000

Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2000.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio II (JB) 2008 1.4 16V (97 hp, gasoline)

1. Razboltovka.ru
2. Rio II (JB)
3. 1.4 16V (97 hp, gasoline)
4. 2008

Table of parameters and wheel bolt patterns of the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2008.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio I (DC) 2001 1.5 16V (98 hp, gasoline)

1. Razboltovka.ru
2. Rio I (DC)
3. 1.5 16V (98 hp, gasoline)
4. 2001

Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2001.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio II (JB) 2009 1.4 16V (97 hp, gasoline)

1. Razboltovka.ru
2. Rio II (JB)
3. 1.4 16V (97 hp, gasoline)
4. 2009

Table of parameters and wheel bolt patterns for the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2009.

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Wheel bolt pattern Kia Rio I (DC) 1.5 16V (98 hp, gasoline) (2000-2005)

moykiario.ru

Choice of wheels for Kia Rio of the second and third generations, correct selection tire and wheel dimensions, bolt pattern, manufacturer with photos and videos

The Kia Rio has been one of the best-selling cars in its class in Russia for several years. Then insert your hand and pull the right mirror on the Kia Rio towards you. It has gained considerable popularity among car enthusiasts due to its modern technical characteristics, level of equipment and comfort, reliability and unpretentiousness, as well as, of course, appearance and price. It must be said that the popularity of the car is not limited to Russia and the CIS countries; it is successfully sold in South Korea, European countries, the USA and others. Indeed, Rio of the second and, especially, third generations have become one of the most commercially successful cars of the brand. Some of the important characteristics of a car today can be considered handling, appearance and fuel consumption. Which wheels to put on a Kia Rio cost 195\55 R16 which ones can be replaced instead, these are expensive and the size is not suitable How to remove the cigarette lighter on a KIA RIO They are the ones that are most influenced by which wheels are installed on the car. In some situations on the Kia Rio 2012, clutch adjustment is considered justified. Spark plugs on Kia Rio 3 and other generations should be changed during other routine maintenance, namely every 8–9 thousand. Wheels on KIA Rio 2015 By choosing the right wheels on Kia Rio 2 and 3, you can significantly improve these and some other characteristics.

Kia Rio with stamped wheels and plastic caps

In addition, the choice of wheels will one way or another affect the following qualities of the car:

• Controllability
• Braking distances
• Comfort level in motion
• Service life of suspension parts and tires
• Acceleration dynamics
• Fuel consumption

The wrong choice of Kia Rio wheels can negatively affect any of these characteristics, as well as lead to a significant increase in financial investments in the car

Wheel sizes of Kia Rio second and third generation

Rio wheel size consists of two component sizes wheel rim and tires. When choosing both separately, you should keep this in mind. Also, if deep tuning is not planned, you need to use what the manufacturer recommends. When using wheels and tires recommended by the manufacturer, full implementation of the vehicle's capabilities is guaranteed, as well as maximum compliance with the declared characteristics in any driving situation. What wheels can be installed on a KIA RIO On the other hand, using wheels of other sizes can lead to worse handling, reduced suspension life, incorrect speedometer readings and other problems.

The main parameters indicated by the marking of rims are the width of the rim, its diameter, as well as the bolt pattern. To choose the right disc for Rio, you need to know how to decipher its size designations. Let's give an example:

Standard size wheel rims for Kia Rio 2 (2005-2011) 5.5Jx15, where the first number indicates the width of the rim of the disc (the place with which the tire will come into contact) in inches, and the second number of the disc diameter is also in inches.

Tires are usually marked as follows: 195/55R15. Adjusting and replacing the clutch on a KIA Rio It is this type of marking that is usually placed on the outside of the tire. The first number in it indicates the width of the tire in centimeters, the second is the percentage ratio of the profile height to the width, and the third is the diameter of the rim for which it is intended.

The wheels of the Kia Rio 3 have similar characteristics to the wheels of the second generation car, however, their exact dimensions depend on the modification and configuration. This refers to the wheels and tires installed on new cars when they are sold. How to remove the cigarette lighter Kia Rio 2012 video Avto Moto Blogger Subsequently, they can be changed to those that have the necessary characteristics or appearance.

Alloy wheels for Kia Rio and Hyundai Solaris “KiK” 13067 Replica (ABC Avtozapchastey Ostrogozhsk)

THANK YOU ALL FOR YOUR VIEWS, LIKES AND SUBSCRIBES! Article: 13067 Series: Replica Diameter: 15 Rim width: 6.0

YST R15 wheels for Hyundai Accent, Solaris, Kia Rio, etc.

Completed order YST R15 wheels for Hyundai Accent, Solaris, Kia Rio, etc. * Official VoKoleso application for Apple

You can also install larger wheels on the Kia Rio, for example 205/55 R16. There is a set of winter tires on the standard ones Kia rims Rio 2010. But this is most likely impossible without making changes to the design of the arches. Although you don’t always have to delve so deeply into the design of a car. Sometimes it is enough to install wheel arch liners so that the tires will not catch when the steering wheel is turned completely to the side and on uneven roads. In Existence or a store, tell them that you need the original for the Kia Rio and that’s it. The Kia Rio wheel size is determined based on the capabilities seats in the arches.

New wheels on Kia Rio

We must remember that for a Kia Rio, a wheel size larger than that recommended by the manufacturer may cause deterioration in dynamics, reduced suspension life and incorrect speedometer readings.

Kia Rio wheel pattern

Kia Rio wheel pattern important parameter which allows you to select wheels for your car. It shows how many studs the wheel is attached to, the diameter of the holes for them and how they are located. How to adjust washer nozzles windshield on Kia Rio. What wheels to put on a Kia Rio cost 195\55 R16 what to replace them with. The studs to which the wheel rim is attached with nuts are usually located on the hub and their number varies passenger cars from 4 to 6. It is important that the holes in the disk are the same diameter as the diameter of the studs and their number is the same. In addition, you need to take into account other parameters related to the bolt pattern, such as the offset and thread of the fastener. The offset of the disc directly affects its choice for a particular car model, and the fastener thread is needed for the correct selection of the conical centering nuts that secure the wheels on the Rio. New Kia Rio cars are usually equipped with Kumho tires Solus. The wheel bolt pattern must correspond to that declared by the manufacturer; for Rio it is 4&100 with a hub hole of 54.1, offset ET 46 and fastener thread M12x1.5. This means that the wheels are mounted on 4 bolts located on a circle with a diameter of 100 mm. Which Kia Rio wheels to choose are largely influenced not only by them. The use of another bolt pattern on the Kia Rio is not allowed for safety reasons. Video How to remove the cigarette lighter on a KIA RIO Here it must be said that the wheels on third-generation cars (2011, 2012, 2013, 2014, 2015, 2016 onwards) in terms of fastening are no different from the second generation (2005-2010 onwards) , so the bolt pattern is the same.

If there is a need to install wheels that do not fit standard hubs, you can use wheel spacers:

Wheel manufacturers

Which Kia Rio wheels to choose is largely influenced not only by their size and bolt pattern, but also by the manufacturer. The price range for new tires and wheels is very wide, and it is not always easy to determine the quality and compliance with the characteristics of a particular brand. To give preference to a certain company, you need to understand in which segments it operates, what products it offers and its reputation in the market. In general, the most well-known manufacturers use the latest technologies in their products, which allows them to achieve better results in many characteristics car rims and tires. Usually the prices for such wheels are much higher than average, but this does not mean that in the average and even budget price categories you cannot find good offers in terms of price-quality ratio. Ru: what wheels to put on a Kia Rio cost 195\55 r16. Today, some Russian brands offer a wide range of tires for cars, and there are good brands and successful models that have managed to gain popularity and a good reputation among car enthusiasts. News How to remove the cigarette lighter on a Kia Rio 2012 video In addition, there are many Chinese companies on the market that offer products that are quite capable of competing with inexpensive brand names. It must be said that both of them use Hi-tech, often purchased from well-known companies, and quality control, which allows us to bring truly competitive products to the market.

If we roughly divide into groups of manufacturers car tires Two main segments can be distinguished:

World-famous companies whose products are sold in many countries and are in great demand:

Russian or Chinese companies offering high quality products:

New Kia Rio cars are usually equipped with Kumho Solus or Hankook Optima tires at the factory. Both options correspond to the highest modern requirements security, and in tests show results even superior to some more expensive models. To replace them, you can choose Nokian Hakkapelitta 5 as showing excellent results in handling and braking on cars of this class in urban conditions. But this is not always feasible, so on a Kia Rio, replacing the spark plugs is possible after. As winter tires you can purchase, for example, Cordiant Polar 2, which shows good results in reducing braking distance, handling and durability.

Of course this is not full list In addition to the brands listed here, there are other equally well-known brands, among whose products you can find great options. In this case, you should use a rule that will help you avoid buying a fake: always buy wheels in specialized stores from reputable suppliers who provide all the necessary information and documentation for the purchase. By following it, you will protect yourself from the troubles associated with purchasing a low-quality product and will be confident in the adequate behavior of the car in any road conditions.

5net.ru

Kia Rio wheel pattern: description, characteristics

If non-standard wheels are installed on your car, this can lead to friction and increased wear. Therefore, it is worth adhering to factory standards. Therefore, the correct selection of wheels is an important element.

Wheel looseness

On Kia Rio in different generations different wheels were used. Usually this information is indicated in the service book, or technical documents car. Also, on every vehicle There is a sign that says which wheels and tires are suitable.
Kia Rio.

Characteristics

Let's look at the wheel bolt pattern for the Kia Rio according to the manufacturer's data by year of manufacture and generation:
Wheel rim.

	Disk size	Disc offset	Sverlovka	Tire size
			175/70R14 front
			175/70R14 front
			175/70R14 front
			175/70R14 front
			175/70R14 front
			175/70R14 front
			175/70R14 front
			175/70R13 front
			175/70R14 front

Options Kia wheels Rio:

PCD 4×100 with diameter from 13 to 15, width from 5J to 6J, offset from 34 to 48. Similar parameters to Honda Fit III (GE) 1.2 2018. Tire size from 13 to 15, width from 175 to 195 and profile from 60 up to 70. Minimum tire size: 185/65R13, maximum: 185/65R15.
Wheel looseness.

Conclusion

As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.

koreanautoreview.com

Wheel bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) (2012-2016)

1. Razboltovka.ru
2. Rio III (UB)
3. 1.6 CVVT (123 hp, gasoline)

Find Kia Rio III (UB) drive parameters

The Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) model was produced from 2012 to 2016. Table of factory and suitable wheel bolt patterns for the Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline).

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Save just in case so as not to lose! Make model modification Auto Year of manufacture Wheel width Wheel diameter Bolt pattern LZ*PCD Offset ET DiameterDIA Installation type

Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2012	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2013	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2014	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2015	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)	2016	6.0	15	4x100.0	48	54.1	Factory
Kia Rio III (UB) 1.6 CVVT (123 hp, petrol)		6.0	16	4x100.0	52	54.1	Factory

If non-standard wheels are installed on your car, this can lead to friction and increased wear. Therefore, it is worth adhering to factory standards. Therefore, the correct selection of wheels is an important element.

Wheel looseness

Different wheels have been used on Kia Rio in different generations. Usually this information is indicated in the service book or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires are suitable.

Characteristics

Let's look at the wheel bolt pattern for the Kia Rio according to the manufacturer's data by year of manufacture and generation:

Wheel rim.

	Disk size	Disc offset	Sverlovka	Tire size
				175/70R14 front
				175/70R14 front
				175/70R14 front
				175/70R14 front
				175/70R14 front
				175/70R14 front
				175/70R14 front
				175/70R13 front
				175/70R14 front

Kia Rio wheel parameters:

PCD 4×100 with diameter from 13 to 15, width from 5J to 6J, offset from 34 to 48. Similar parameters to Honda Fit III (GE) 1.2 2018. Tire size from 13 to 15, width from 175 to 195 and profile from 60 up to 70. Minimum tire size: 185/65R13, maximum: 185/65R15.

Wheel looseness.

Conclusion

As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.

Kia Rio cars have been in constant demand and popularity among Russian car enthusiasts for more than fifteen years. Thanks to the manufacturer's affordable pricing policy, good technical characteristics and attractive appearance, there are even queues of buyers at Kia car dealerships in our country who want to become Rio owners.

It is not surprising that every Kia Rio owner wants to distinguish his car from thousands of others. The most in a simple way To do this is to replace the standard disks.

How to determine the parameters of Kia Rio wheels

When choosing new wheels for your Rio, first of all you need to pay attention not to their appearance, but to the parameters that they must meet. In principle, there is nothing complicated here, since all disks have standard markings. For example, Kia cars Rio 2013-2016 have discs in the database, whose markings are as follows: 6J (disc width) R15 (disc diameter) PCD 4x100 (number of holes, diameter of the circle around which their centers are located) ET48 (disc offset, mm) DIA54.1.

Wheel bolt pattern

Even a novice driver can determine the bolt pattern of standard Kia Rio wheels. All Rio models have 4 of them. You can measure the center-to-center distance of the holes using a caliper. Next, simple calculations are carried out that allow us to obtain the PCD parameter, which is actually called the bolt pattern.

Surely you will agree that the car will look much better if it has wheels of the original design. That is why many car enthusiasts seek to replace standard wheels with others that are more advanced and attractive. However, in this kind of tuning you need to carefully approach technical parameters wheels The main characteristic that you need to pay attention to is the bolt pattern. In this short article you will learn the wheel bolt pattern of popular Kia car LEDs of different years of production.

Almost the first cars that saw mass production and fell in love with domestic car enthusiasts. They were produced with two wheel diameters:

The above data applies to machines equipped with engines:.

Drilling Kia Ceed 2010

This year the car was subject to modifications and some changes. Cars of this period are quite popular and widespread in the territory Russian Federation and not only.
This year was equipped with the following wheels:

1. R15 with tire size 195/65, the disc offset is 47 mm, and its size is 15x5.5.
2. R16 with tire size 205/55, the disc offset is 51 mm, and the size is 16x6.5.

The above data also applies to models that are equipped with engines: 1.4L; 1.6CDRI; 1.6L; 2.0L crdi.

All other variants were produced with the following characteristics:

• Wheel size 15x6.0, offset 45 mm, tire size 185/65R15;
• Wheel size 15x6.0, offset 45 mm, tire size 195/65R15;
• Wheel size 15x6.0, offset 45 mm, tire size 205/60R15.

For all specified configurations, the bolt pattern is 5×114.3

Drilling Kia Ceed 2013

The line has been improved, but cars were produced this year with only two engine options:

1. Kia Sid 1.4
2. Kia Sid 1.6

The first option was equipped with wheels with rim size 15×6.0, departure 45 and tire size 195/65R15.

The second option is disk size 16×6.5, departure 46 and tire size 205/55R15.

Both configurations have a bolt pattern of 5×114.3.

It is worth noting that all cars of this model from different years of production have the same drilling (5×114.3), so it is almost impossible to make a mistake in its selection. The only thing you need to pay attention to is the tire sizes and other parameters.